Dana-A - Skin care device for acne

  • Quick and easy acne care, visible results already after 12 hours

    The Dana-A skin care device for acne uses a unique patented technology combining the benefits of blue ray and a special heat controlled by a microprocessor. It only takes 2 minutes and 30 seconds to care for each acne area. The blue-ray light generated by the bio-ceramic tip kills the bacteria that causes acne from inside the oil producing glands and the heat sterilises the acne area. Dana-A also relieves mosquito bites.

    Blue ray and heat

    Anyone who has had acne treatments at skin care clinics know that blue-ray is the newest technology. Our Dana-A uses blue-ray at a 405 nm wavelength, to optimise both safety and time used. It is completely painless and easy to use by yourself. Now you can get rid of acne in the comfort and privacy of your home.

    Benefits of Dana-A

    - Quick and easy acne care (only 2 minutes and 30 seconds)
    - You can see results already after 12 hours
    - Newest and most effective technology for acne care
    - Also relieves irritating mosquito bites
    - Small, light and stylish

    - 2 years guarantee

    Power source: Lithium Polymer Battery 3.7V/250mA

    Dana-A can be recharged in 1 hour by connecting to a computer using the USB recharging cable.

  • Designed for ease of use

    Charging Dana-A

    1) Turn on your computer 
    2) Connect the USB cable to your Dana-A device
    3) Connect the USB cable to your computer (charging will commence)

    A green LED will turn on and the device will beep once to indicate that the device is charging. When the charge is complete the device will beep once and a green LED light will start to blink. For safety reasons the device will not work in charging mode. Charging time is approximately 60 minutes.

    How to use:

    1) Press power button and a blue LED blinks and the device is set to warm-up status.
    2) Wait 1 minute, and when warm-up finishes a blue light turns on at the bio-ceramic tip.
    3) Press the power button one more time and the bio-ceramic tip blinks and starts operating.
    4) Lightly hold the bio-ceramic tip to the acne area. 
    5) Operation mode takes 2 minutes and 30 seconds.
    6) When it is finished, the light on the bio-ceramic tip turns off with a beep.
    7) If you want to use it at another area, press the power button one more time to re-start the procedure without the warm-up phase.
  • Newest technology for acne care

    Size: 40x73x15mm
    Weight: 35 grams
    Power source: Lithium Polymer Battery 3.7V/250mA
    Operating temperature: 49+-2 degrees C
    Charging time: 60 minutes
    Usage time: 2 minutes 30 seconds
    Charging rate: 5V/300mA
    Temperature for storage: -20 degrees C to +60 degrees C
    Humidity for storage: 20% to 90%
    Electrical insulation grade: Class II/BF
    Transportation atmosphere: 700hPa - 1060hPa
    Materials:
    Case: ABS
    Tip: Bio-ceramic
    Battery: Li-Polymer 250mA, 3.7V
    PVA Board



Pin It Fancy

Related Items